This instruction show you guide on how to use VF2 Flasher programmer to do ECU reading and writting for Land Rover Siemenus MS43/KV6.For more VF2 Flasher projects please refer to:VF2 Flasher Cases.
Procedures:
Go to models list to select “Land Rover-Siemens MS43/KV6”,then press “Instructions”
Now here it will show “External connections” and
Press “External connections” to build connection by wires
After then back to menu models list and press “Select”
Press “Identify” to recognize ECU
Success
There are several option in the menu
Here select “EXT.EEP” and press “Read 93C86”
Wait reading processing
After finishing,please select a location to save ECU data file
It is same operations if you want read out all data files from ECU.
After reading done,just save it on VF Flasher
And if you want to do writting ECU,please select the files you want to write into ECU
Press “Program All”–>Select ECU file to start writting.
Then just wait processing finish.
This instruction show you guide on how to solve Doosan excavator P0408 maximum EGR rate…
Here is the instruction show you guide on how to calibrate 2403 steering valve for…
This function requires all connectors to be disconnected from all electrohydraulic valves on the tractor.You…
This instruction show you guide on how to remove center joint and center frame for…
How to solve Doosan heavy duty machine P0100 fault code signal error of air mass…
If the vehicle is oscillating on the wayline or catches up the wayline very slowly…