In this instruction,we are going to teach you how to change the setting of interior lamp door unlock interconnecting control on by Launch X431 Torque.Here for more Launch X431 test projects,please check:How to use Launch X431.
Procedures:
Connect Launch X431 Torque to Nissan Sentra,then enter menu to select “Nissan”
Select “Nissan V44.30”,then click OK
Select “Vehicle With 16PIN”
Check “VIN” and select “OK”
Select “Automatic Selection (VIN)”
Confirm VIN,Model,Year and select “OK”
Then select “System Selection”
Select “”BCM(Body Control Module)”
Check system info and then select “OK”
Select “Special Function”
Select “Set I/L D Unlock Intcon”
System info,please read and select “OK”
The current setting and be changed “ON” or “Off
Once completed select the back button
Here is the instruction show you guide on how to calibrate 2403 steering valve for…
This function requires all connectors to be disconnected from all electrohydraulic valves on the tractor.You…
This instruction show you guide on how to remove center joint and center frame for…
How to solve Doosan heavy duty machine P0100 fault code signal error of air mass…
If the vehicle is oscillating on the wayline or catches up the wayline very slowly…
This is instruction show you guide on how to adjust cruise control release linkage for…