LCD Instrument Cluster Retrofit Coding by JLR PATHFINDER for Range Rover L494

In this example,car-auto-repair.com show you guide on how to do coding for Range Rover L494 2017 LCD instrument cluster retrofit by JLR PATHFINDER.More about Land Rover topics,please check it here:Land Rover trouble repair

 

Preparations:

JLR Pathfinder Free Download and Installation

How to Install Jaguar & Land Rover JLR Pathfinder on Win7 and Win 10

 

Procedures:

Connect JLR PAHTFINDER DoIP interface to Range Rover L494

After vehicle identification,click “ECU Diagnostics”

Select “Instrument Panel Cluster Control Module (IPC)”,the click “ECU Replace”

Click “Next”

Wait for process….

Click “Next”

Now configuration coding successfully.

Get a B100E-64 error code,you are available to install a video harness for your new instrument.

Done!

auto

Recent Posts

Massey Ferguson Tractor Electrohydraulic Spool Valves Configuration

This function requires all connectors to be disconnected from all electrohydraulic valves on the tractor.You…

2 days ago

How to Remove Center Joint and Center Frame for HITACHI Hitachi EX5600-7B

This instruction show you guide on how to remove center joint and center frame for…

5 days ago

How to Repair Doosan Machine P0100 DTC Signal Error

How to solve Doosan heavy duty machine P0100 fault code signal error of air mass…

2 weeks ago

How to Solve Fendt 800 Vario S4 wayline Running Slow

If the vehicle is oscillating on the wayline or catches up the wayline very slowly…

2 weeks ago

How to Adjust Cruise Control Release Linkage for Kubota L3901 Excavator?

This is instruction show you guide on how to adjust cruise control release linkage for…

2 weeks ago

How to do Perform Cylinder Cut-off Test for Massey Ferguson Tractor

This instruction show you guide on how to use AGCO EDT diagnostic software to perform…

2 weeks ago