Categories: Auto Repair

Lexus ES250 Engine Misfire Suddenly When Driving

One of my customer called me for his Lexus ES250 misfire suddenly when driving.He described that his Lexus ES250 with30,000 miles usually engine misfired suddenly when driving without any omens.And after misfiring,sometime can restart the engine,but sometime can not.

 

Lexus ES250 Engine Misfire Diagnose:

Scan the trouble code by GTS firstly,there is not any DTCs.

Then tested the cars,but the engine misfire symptoms do not occur during we testing car.

 

So,our technicians asked the Lexus ES250 owner to record the situation when misfire trouble appearing againt,include:speed,road condition,temperature,weather….

 

Several days later,the customer called back again and told our technicians that the misfire appeared again.After analyzing the data record by customer.And found the misfire usually happened on rainy day.So technician believe the misfire trouble was related to windshield wipers.

 

Test car again,and turn on windshield wipers, as expected the Lexus ES250 misfire after a short distance driving,and it was be restarted at several time trying.

 

It most likely the misfire trouble caused by below reasons:

Wire harness damaged

Connector soaking or loosen.

Power or GND trouble.

 

Detected the ECU power voltage as below:

It shows that the ECU voltage declined when speed rising.Technicians found the not only power but also GND of ECU and windshield wipers use in common:A63,A2.And the GND bolts was loosened.After reinforcing the GND,test the car with windshield wipers turning on,the misfire trouble disappeared.

auto

Recent Posts

MANITOU MT6034 Telehandlers PWP System Deactivation Tests

This instruction show you guide on how to do deactivation test for MANITOU MT6034 telehandlers…

14 hours ago

How to Solve Liebherr Machine ECU2 P1119 SCR System Plausibility Error

This instruction show you guide on how to solve Liebherr machine ECU2 P1119-00 trouble code…

2 days ago

Bobcat Machine P18A5 Suction Line Heater Open Error Solution

This instruction show you guide on how to solve Bobcat machine trouble code P18A5 suction…

7 days ago

AGCO Machine SPN 102 – FMI 31 Intake Manifold Pressure Drop Too High at Cranking

The measured intake manifold pressure (signal from boost pressure sensor) is below the warning limit…

1 week ago

JCB 3CX 4CX Backhoe Loader Engine Throttle Cable Removal and Replacement

JCB 3CX 4CX Backhoe Loader engine throttle cable is routed from the L.H. side of the…

2 weeks ago

How to Replace Fuel Tank Breather Filter Element for Liebherr R9600 Excavator

Here is the instruction show you guide on how to replace fuel tank breather filter…

1 month ago