This service information show you guide on how to solve pressure differential lift cylinder error code for Linder forklift truck.
Preparations:
2023 Linde Service Guide LSG 5.2.2 U0278 and 5.1.2 Free Download
Procedures:
On industrial trucks, the pressure differential lift cylinder error code may be displayed repeatedly.
The solution is to modify the supply lines from the lift cylinder to the sensors.
The following components are required for the conversion work:
Course of action
Instead of one supply line (mini measuring line) from each lift cylinder (left/right) to each pressure sensor, both sensors are connected to one lift cylinder (left). The second supply line is omitted.
Disassemble the supply lines (1) and (2)
Attach the connecting piece 0009452234 (3) to the left-hand lift cylinder with the sealing ring 0009620451 (4) on the pipe adaptor 0019512159 (5) .
Attach the pipe adaptor 0019512159 with the sealing ring 0009620451 (6) to the t-piece 0009513347 (7) .
Attach the sensor lines 0009445004 (8) and (9) to the t-piece 0009513347.
Connect the entire adaptor to the supply line on the lift cylinder (10)
More service information,please refer to:Linde Forklift Truck Repair
Here is the instruction show you guide on how to calibrate 2403 steering valve for…
This function requires all connectors to be disconnected from all electrohydraulic valves on the tractor.You…
This instruction show you guide on how to remove center joint and center frame for…
How to solve Doosan heavy duty machine P0100 fault code signal error of air mass…
If the vehicle is oscillating on the wayline or catches up the wayline very slowly…
This is instruction show you guide on how to adjust cruise control release linkage for…