Launch X431 idle speed adjustment function is used to change the vehicle idle speed via diagnostic equipment to more accurately control or correct the fuel injection amount of each cylinder.This instruction show you guide on how to use Launch X431 PAD V LINK HD to perform idle speed adjustment for MAN truck.
Related Contents:
Procedures:
Connect SmartLink C adapter to the MAN truck OBD port
Run Launch X431 HD Application on the PAD
Select “Service Function”
Select “Idle Speed Adjustment”
Click “To Diagnose”
Select “MAN” in brands list
Then Press “ok”
Then select “Idle Speed Adjustment”à”Program”à”Idle Speed Adjustment”
Here you need follow the prompt message to input the new idle speed valve
Here input new valve “1000”,then click “OK”
After then click “Write”,and wait process finish
Completed successfully
And then exit the program.
Done
More test report about Launch X431 please check:Launch X431 Test report
This instruction show you guide on how to remove second tank for CLAAS AXION 960-920…
This instruction show you guide on how to solve Doosan excavator P0408 maximum EGR rate…
Here is the instruction show you guide on how to calibrate 2403 steering valve for…
This function requires all connectors to be disconnected from all electrohydraulic valves on the tractor.You…
This instruction show you guide on how to remove center joint and center frame for…
How to solve Doosan heavy duty machine P0100 fault code signal error of air mass…