Categories: Auto Repair

Maserati Granturismo M145 2012 Service Light Reset by Launch X431

This instruction show you guide on how to use Launch X431 device to reset service light for Maserati Granturismo M145 2012.

 

What You Need?

Launch X431 V+

 

 

Precautions:

1.Park the vehicle on a level surface. The installed sensor is very sensitive to the tilt of the vehicle, otherwise an incorrect measurement error will be displayed because the vehicle is not level.

2.The gear selector must be in P position.

3.After the engine runs, wait 10 minutes for making various vehicle operating indexes stable. After this time, the used individual sensor signal will give out the correct output.

 

Operating Instructions:

1.Turn the ignition to ON;

2.Select Europe;

3.Select the Maserati V10.03;

4.Select the GRANTURISMO model;

5.Select the M145;

6.Select the Gasoline;

7.Select the System Scan;

8.Select the Marelli Instrument Cluster;

9.Read out the ECU ID, and select Confirm;

10.Select the Special Function;

11.Select the Service Info Reset;

12.Pay attention to the reset service hints to ensure the date on the instrument cluster is set correctly;

13.After confirmed, it indicates “Procedure completed”, then the operation ended.

auto

Recent Posts

Doosan Excavator P0408 Maximum EGR Rate Governor Deviation Error Solution

This instruction show you guide on how to solve Doosan excavator P0408 maximum EGR rate…

21 hours ago

How to Calibrate 2403 Steering Valve for Fendt 800 S4 Tractor

Here is the instruction show you guide on how to calibrate 2403 steering valve for…

3 days ago

Massey Ferguson Tractor Electrohydraulic Spool Valves Configuration

This function requires all connectors to be disconnected from all electrohydraulic valves on the tractor.You…

6 days ago

How to Remove Center Joint and Center Frame for HITACHI Hitachi EX5600-7B

This instruction show you guide on how to remove center joint and center frame for…

1 week ago

How to Repair Doosan Machine P0100 DTC Signal Error

How to solve Doosan heavy duty machine P0100 fault code signal error of air mass…

2 weeks ago

How to Solve Fendt 800 Vario S4 wayline Running Slow

If the vehicle is oscillating on the wayline or catches up the wayline very slowly…

3 weeks ago