This instruction show you guide on how to use AVDI programmer to do all key lost programming for Mitsubishi Outlander 2007 all key lost.And for more AVDI key programming,check here:AVDI Programmer Test Projects
Mitsubishi Outlander 2007 All Key Lost Programming Procedures:
Start off by opening the Abrites Diagnostics for Mitsubishi
Connecting to the interface,please wait…
Trying to identify vehicle automatically…
Select “Special Function”–>”Key Programming”
It will show you the vehicle information as below,please click “Next” to continue
Select “Key registration” and click “Next”
AVDI will read out the PIN code automatically,click “Prepare”
Select “Hitag2”
Click “OK” to continue
And click “OK”
The key can now be programmed
Insert the key into ignition and turn to “ON” position
Key registered.
If you want program next key,inert into ignition and turn ON
And press “Next” within 30 seconds.
Otherwise wait for timeout to elapse.
After 30 seconds waiting,the procedures is complete,check if the key is working.
This instruction show you guide on how to solve Doosan excavator P0408 maximum EGR rate…
Here is the instruction show you guide on how to calibrate 2403 steering valve for…
This function requires all connectors to be disconnected from all electrohydraulic valves on the tractor.You…
This instruction show you guide on how to remove center joint and center frame for…
How to solve Doosan heavy duty machine P0100 fault code signal error of air mass…
If the vehicle is oscillating on the wayline or catches up the wayline very slowly…