Vehicles: Montana 1.8, Celta 1.4 and Corsa 1.0.
Main components
1 Nozzles / Canister / Pump / Fan / Probe;
2 Cold start;
3 Stepper motor;
4 Capacitor;
5 Coil;
6 Coil;
7 Crystal;
8 5V regulator;
9 Soic 95040 code;
10 BGA processor.
Technical specifications
Special features
Interchangeable with each other as long as the file of the injection, flex ECU and gasoline ECU are not fully interchangeable.
Common defects
Probe does not read, SOIC corrupts the file and defects accelerated.
Note: To change the ECU from car to car, simply change the EPROM.
This function requires all connectors to be disconnected from all electrohydraulic valves on the tractor.You…
This instruction show you guide on how to remove center joint and center frame for…
How to solve Doosan heavy duty machine P0100 fault code signal error of air mass…
If the vehicle is oscillating on the wayline or catches up the wayline very slowly…
This is instruction show you guide on how to adjust cruise control release linkage for…
This instruction show you guide on how to use AGCO EDT diagnostic software to perform…