Here is a step-by-step guide on how to use MUT-3 diagnostic software to register a new key for Mitsubishi Lancer 2008.
Preparations:
MUT-3 MUT-III Mitsubishi Diagnostic Software Free Download
MUT-III ECU Rewrite ROM Data from 2009 to 2021
Procedures:
Connect MUT-3 interface between Mitsubishi Lancer OBD port and PC,then run MUT-III SE software.
Select “STV”
After vehicle communication build,it will show you with the vehicle information as below
Now you need select “KOS/IMMO/Keyless/TPMS” from System list,then click “OK” button
Then click “Special Function”–>”Key Registration”
Execute the key Registration
Input the password,and press “OK” button
Mitsubishi Key programming/registration completed.
If you need to register additional keys,insert additional key,turn IG on and press OK button within 30 seconds.
If you only want to register only one key,click “No” button and test you need key.
This instruction show you guide on how to solve Doosan excavator P0408 maximum EGR rate…
Here is the instruction show you guide on how to calibrate 2403 steering valve for…
This function requires all connectors to be disconnected from all electrohydraulic valves on the tractor.You…
This instruction show you guide on how to remove center joint and center frame for…
How to solve Doosan heavy duty machine P0100 fault code signal error of air mass…
If the vehicle is oscillating on the wayline or catches up the wayline very slowly…