Categories: Auto Repair

Nissan Fengshen ECU Trouble: Misfiring Engine & Vibration

Several days ago,my friend Bob driven his Nissan Fengshen to my garage to ask for help.He said that his car vibration when driving.And i tested the symtpom,it really terrible.For educational purpose,I share the progress of How to solve Nissan Fengshen vibration caused by ECU problem.

According the experience of repairing,it most likely that misfiring engine cause car vibration.

1. Checked the ignition coil wiring plug,and removed the ignition coil wiring plug of first engine cylinder,found the vibration still exist.

2. Then replaced others ignition coil wiring plug with first cylinder’s,I found difference is obvious.

3. Re-connect the ignition coil wiring plug to first engine cylinder,found the trouble exist still.

 

Above operation and result most likely proved that the ECU get trouble and can not generate high voltage ignition signal.And we need to follow the principle of simple to complex.So i remove the ECU from Nissan Fengshen,and checked the pin that give the ignition signal to first engine cylinder coil wiring plug,and found there is a audion occuring short circuit.

 

After replacing a new same model audion,and installing all of parts back to car,starting the car and found the vibration and misfiring engine trouble disappeared.

auto

Recent Posts

Doosan Excavator P0408 Maximum EGR Rate Governor Deviation Error Solution

This instruction show you guide on how to solve Doosan excavator P0408 maximum EGR rate…

1 day ago

How to Calibrate 2403 Steering Valve for Fendt 800 S4 Tractor

Here is the instruction show you guide on how to calibrate 2403 steering valve for…

3 days ago

Massey Ferguson Tractor Electrohydraulic Spool Valves Configuration

This function requires all connectors to be disconnected from all electrohydraulic valves on the tractor.You…

6 days ago

How to Remove Center Joint and Center Frame for HITACHI Hitachi EX5600-7B

This instruction show you guide on how to remove center joint and center frame for…

1 week ago

How to Repair Doosan Machine P0100 DTC Signal Error

How to solve Doosan heavy duty machine P0100 fault code signal error of air mass…

2 weeks ago

How to Solve Fendt 800 Vario S4 wayline Running Slow

If the vehicle is oscillating on the wayline or catches up the wayline very slowly…

3 weeks ago