Autel IM608 Pro programmer is powerful device for cars key programming,today here comes example on how to use Autel IM608 Pro to do all key lost programming for Nissan Sentra.
Device You Need:
Autel IM608 Pro Programmer (Official Amazon)
Procedures:
Connect Autel IM608 Pro VCI/J2534to Nissan Sentra OBD2 port
Then pair the VCI with the IM608 device
Power on IM608 Pro PAD,then select “IMMO”à”Nissan”à”Automatic Selection”
Turn on the hazard warning light
Open and close the driver door once
Select “Immo/smart system”
Select “Immobilizer remote control learning”
Smart Key learning
Turn on Hazard switch
Turn off ignition switch or power switch
Turn on and turn off the driver’s door onece
This procedure erases all registered key ID
Therefore,all of the customer’s key should be obtained before starting this procedure.
Click “Yes”
Please operate according to the following procedurs:
1:Press push-button ignition switch for 2 seconds or more than turn ignition switch to the ON position.
Press the push start button once.
Attach the smart key that needs to be programmed to the push start button.
Whether the instrument lights up automatically?
Click “Yes”
Key programming successfully.whether to program next key?
Click “Yes”
Turn off the ignition,then press the ignition and hold a second
Press the push start button once.
Attach the smart key that needs to be programmed to the push start button.
Whether the instrument lights up automatically?
When the dashboard lights up,press “Yes”
Key programming successfully,click “Yes”
For more Nissan cases, please refer to Nissan Trouble Repair.