Categories: Auto Key Program

Nissan Sentra All Key Lost Programming by Autel IM608 Pro

Autel IM608 Pro programmer is powerful device for cars key programming,today here comes example on how to use Autel IM608 Pro to do all key lost programming for Nissan Sentra.

 

Device You Need:

Autel IM608 Pro Programmer (Official Amazon)

Nissan Sentra Smart Key

 

Procedures:

Connect Autel IM608 Pro VCI/J2534to Nissan Sentra OBD2 port

Then pair the VCI with the IM608 device

 

Power on IM608 Pro PAD,then select “IMMO”à”Nissan”à”Automatic Selection”

Turn on the hazard warning light

Open and close the driver door once

 

Select “Immo/smart system”

Select “Immobilizer remote control learning”

Smart Key learning

Turn on Hazard switch

Turn off ignition switch or power switch

Turn on and turn off the driver’s door onece

This procedure erases all registered key ID

Therefore,all of the customer’s key should be obtained before starting this procedure.

Click “Yes”

 

Please operate according to the following procedurs:

1:Press push-button ignition switch for 2 seconds or more than turn ignition switch to the ON position.

 

Press the push start button once.

Attach the smart key that needs to be programmed to the push start button.

Whether the instrument lights up automatically?

Click “Yes”

 

Key programming successfully.whether to program next key?

Click “Yes”

Turn off the ignition,then press the ignition and hold a second

Press the push start button once.

Attach the smart key that needs to be programmed to the push start button.

Whether the instrument lights up automatically?

When the dashboard lights up,press “Yes”

Key programming successfully,click “Yes”

For more Nissan cases, please refer to Nissan Trouble Repair.

auto

Recent Posts

How to Calibrate 2403 Steering Valve for Fendt 800 S4 Tractor

Here is the instruction show you guide on how to calibrate 2403 steering valve for…

10 hours ago

Massey Ferguson Tractor Electrohydraulic Spool Valves Configuration

This function requires all connectors to be disconnected from all electrohydraulic valves on the tractor.You…

3 days ago

How to Remove Center Joint and Center Frame for HITACHI Hitachi EX5600-7B

This instruction show you guide on how to remove center joint and center frame for…

6 days ago

How to Repair Doosan Machine P0100 DTC Signal Error

How to solve Doosan heavy duty machine P0100 fault code signal error of air mass…

2 weeks ago

How to Solve Fendt 800 Vario S4 wayline Running Slow

If the vehicle is oscillating on the wayline or catches up the wayline very slowly…

2 weeks ago

How to Adjust Cruise Control Release Linkage for Kubota L3901 Excavator?

This is instruction show you guide on how to adjust cruise control release linkage for…

2 weeks ago