Categories: Auto Repair

Nissan Sylphy Immobilizer System Password Reading by Launch X431

Remove, install BCM system or key lost new matching key, need to do key registration function for the vehicle, and key registration steps need to obtain and calculate the security password.This instruction show you guide on how to use Launch X431 to read out immobilizer system security password for Nissan Sylphy 2008.For Nissan repair diagnostics work,please check here: Nissan Repair Projects

 

What You Need?

Launch X431 V Pro

 

Procedures:

The following is the 2008 Nissan Sylphy based on the steps of anti-theft password read and calculating operation:

1.Turn on the ignition

2.Select ” NISSAN”

3.Select “V43.20” version

4.Select “16PIN”

5.Select “Maintenance”

6.Select “NATS”

7.Select “General Mode”

8.Select “Pin Code”

9.It displayed PIN CODE

10.Select OK

 

More test report about Launch X431 please check:Launch X431 Test report

auto

Recent Posts

Doosan Excavator P0408 Maximum EGR Rate Governor Deviation Error Solution

This instruction show you guide on how to solve Doosan excavator P0408 maximum EGR rate…

2 days ago

How to Calibrate 2403 Steering Valve for Fendt 800 S4 Tractor

Here is the instruction show you guide on how to calibrate 2403 steering valve for…

4 days ago

Massey Ferguson Tractor Electrohydraulic Spool Valves Configuration

This function requires all connectors to be disconnected from all electrohydraulic valves on the tractor.You…

7 days ago

How to Remove Center Joint and Center Frame for HITACHI Hitachi EX5600-7B

This instruction show you guide on how to remove center joint and center frame for…

1 week ago

How to Repair Doosan Machine P0100 DTC Signal Error

How to solve Doosan heavy duty machine P0100 fault code signal error of air mass…

2 weeks ago

How to Solve Fendt 800 Vario S4 wayline Running Slow

If the vehicle is oscillating on the wayline or catches up the wayline very slowly…

3 weeks ago