OBDeleven Reset Service & Inspection Interval Light for Audi A7

This article show a guide on how to use OBDeleven to reset Audi A7 service & inspection interval light.If you bring your vehicle to small independent repair shop or doing the work yourself and they don’t have a service shop that you’re working with maybe doesn’t have something like this give you ability to reset this will do so much less than what an Audi dealer would charge for an hour labor.So this is going to be more viable option especially if you’re doing your own work and gives you the ability to reset your service light just like you would from the factory.

 

And Audi dealer will charge people to reset their service light an hour’s labor if they weren’t getting a full service done,it may cost you a lot of money.

 

Preparations:

OBDeleven OBD2 Diagnostic Device

OBDeleven VAG Car Diagnostics App Free Download

 

Procedures:

Firstly,you need to plug the OBDeleven to OBD2 port,then turn the key into the ON position,because this vehicle obviously doesn’t have an actual key.The way you would do that is keep your foot off the brake and then just push the start/stop button if your foot is on the brake the engine is obviously going to start.

Then go to the OBDeleven app and you’re going to connect to your device.

Once you’re connected,on the top left of the screen you’re going to see three lines

Tap the three lines icon,and then we are going to “My car”

Once you go to my vehicle you click on the app section.

Once you click on the app section,it will pull up all the available options you have for this particular vehicle

We are going to scroll down until we hit our “Oil Service Reset”

Hit that checkmark

Note:Make sure all service operations were completed as per the service or owners manual.Make sure all service operations were completed as per the service or owners manual.

Then it will prompt success on the bottom you get that green bar that lights up on the bottom and say success,once it is accepted and we can go back,and select “INSPECTION SERVICE Reset”

Then we go to down to the inspection reset hit that and then go hit that checkmark

Once done,it’s going to say success and you have now successfully performed the service light and inspection reset on you Audi.

auto

Recent Posts

How to Calibrate 2403 Steering Valve for Fendt 800 S4 Tractor

Here is the instruction show you guide on how to calibrate 2403 steering valve for…

2 days ago

Massey Ferguson Tractor Electrohydraulic Spool Valves Configuration

This function requires all connectors to be disconnected from all electrohydraulic valves on the tractor.You…

5 days ago

How to Remove Center Joint and Center Frame for HITACHI Hitachi EX5600-7B

This instruction show you guide on how to remove center joint and center frame for…

1 week ago

How to Repair Doosan Machine P0100 DTC Signal Error

How to solve Doosan heavy duty machine P0100 fault code signal error of air mass…

2 weeks ago

How to Solve Fendt 800 Vario S4 wayline Running Slow

If the vehicle is oscillating on the wayline or catches up the wayline very slowly…

2 weeks ago

How to Adjust Cruise Control Release Linkage for Kubota L3901 Excavator?

This is instruction show you guide on how to adjust cruise control release linkage for…

3 weeks ago