Categories: Auto Key Program

Porsche Cayenne 08 All Key Lost add new key Guide

In this article,i will share the method how to add new key for Porsche Cayenne all key lost.

Fold keys are divided into two frequency, 315M is the ordinary fold, and 433M smart key, both of them can use write start all key lost.Below is operation procedure in detail.

 

For Porsche Cayenne Key Programming:

Porsche Cayenne,Tiguan 2009 PIN Code Caculate Guide

How To Add New Key For Porsche Cayenne

1.Dismantle the KESSY Module

Under the steering wheel to find KESSY computer, dismantle the KESSY Module. As shown below, a black box.

Open the shell, in the computer board near the CPU to find 8 pin chip, model num is 93C86. Use programmer to read the data.

2.Write start key

Use TM100 Transponder Key Programmer, VVDI or other wirte start device to load the data that read from 93C86 chip. The following I use VVDI make a demo:

1)Open the VVDI2 Key Programmer Software,then select “Immo data processing tool”,”Porsche”, Car Model”Cayenne”,type”93C86″

2)Then load in the data form 93C86 Chip,VVDI2 will display the key information include “ID” and “Key Number” and so on.Put a new key into the VVDI2 coil.Click to generate dealer key,the device will generate a new 93C86 file(save it),and it will remind you that”the dealer key generate successful”.

3)Load the new 93C86 file into VVDI2 to chack 3 key informaiton in the data as shown below.

4) Use the VVD2 write the new 93C86 file back in 93C86 chip and weld it back on KESSY Computer,assemble KESSY on your car.

auto

Recent Posts

HITACHI Construction 4JJ1 P0092 Fuel Pressure Regulator Control Circuit High

Here car-auto-repair.com show you guide on how to solve ISUZU construction 4JJ1 engine P0092 fuel…

2 hours ago

How to Solve Perkins 1106D EPG Engine E398 Low Fuel Rail Pressure Error

Here is the illustration show you guide on how to solve Perkins 1106D electric power…

17 hours ago

Deutz EMR3 Aassembly Inspection and Initialisation Test Guide

Here comes the instruction on how to use SerDia2010 to perform assembly inspection and initialization…

2 days ago

HITACHI ZX-5 Excavator No Load Max Differential Pressure Measurement Guide

This instruction show you guide on how to perform No load max differential pressure measurement…

3 days ago

How to Solve Doosan Machine P02EB Over Temperature Error

Here is the instruction show you guide on how to solve Doosan machine P02EB over…

4 days ago

How to Perform Relative Cylinder Compression Test for Detroit GHG17 Engine

This illustration show you how to use Detroit Diesel Diagnostic Link diagnostic software to do…

5 days ago