In this instruction,i will show you guide on how to use OPCOM to do trailer interface module programming for Opel Astra-J 2011.More projects about Opel please refer to:Opel trouble repair.
Preparations:
Newest OPCOM VAUX-COM V1.95 All Version Free Download
Procedures:
Connect your OPCOM interface to Opel Astra-J obd port,then run software
Enter system selection to select “Trailer Interface Control Module”
Before programming,please make sure there is no DTCs present.
After then select “Programming”
Click “Program Variant Configuration”
Now here you can select “Trailer hitch hook” and “Type of trailer lamps”
Select option you need then click “Program” to start programming process and wait completion.
This instruction show you guide on how to solve Doosan excavator P0408 maximum EGR rate…
Here is the instruction show you guide on how to calibrate 2403 steering valve for…
This function requires all connectors to be disconnected from all electrohydraulic valves on the tractor.You…
This instruction show you guide on how to remove center joint and center frame for…
How to solve Doosan heavy duty machine P0100 fault code signal error of air mass…
If the vehicle is oscillating on the wayline or catches up the wayline very slowly…