This short article will show you guide on how to reset maintenance service on Volvo V60, and should also apply to Volvos S60,XC60,V70,XC70 and S80 after changing oil& filters inspecting your car. You don’t need to use diagnostic tools or visit garage or car dealer to reset the SRI(Service Reminder Indicator).
Here is a same type article about reset maintenance service for you reference: How to Reset the Service Reminder on Your Volvo
Steps:
This procedure should work in any volvo car with this kind of instrument cluster.
Putting the key into the ignition and short press the start button
Hold the trip reset button, meanwhile hold the “start stop engine” button, until you see that “i” blinking, then release your fingers.
You will hear a little beep that confirmed that our service reminder is reset.
After check there is no messages in the car, turn off the ignition.
Then press brake and start the engine.
if you want to check more cases about Volvo, please refer to Volvo Trouble Repair.
This instruction show you guide on how to perform hydrocarbon dosing control valve test for…
This instruction show you guide on how to solve Fendt tractor SPN 100 FMI 31…
Detroit GHG17 Heavy Duty Engine Piston Protrusion Measurement Procedure Related Contents: 2024.06 Detroit Diesel…
This instruction show you guide on how to remove and install water temperature regulator housing.…
Monza, Kadett and Ipanema Multec 700 GM ECU Components Pinout Vehicles: Monza, Kadett and…
This illustration show you guide on how to remove oil pressure regulation valve for CLAAS…