After steering column or body control module replacement,you need perform calibration.So this instruction show you guide on how to use Launch X431 to calibrate steering column for Range Rover.More about Range Rover work,please check it here:Range Rover Trouble Repair
Procedures:
Connect Launch X431 to Range Rover and enter menu select Range Rover to enter quick test option.After then select “BCM”
Select “Special Function”
Select “Steering column calibration”
Follow the prompt massage to switch on the ignition
Press “Yes” to clear the adaptive value
Valve clear done!
Steering column calibration beginning
Calibration finished
Turn off the ignition
Turn on the ignition
After then clear all DTCs
Turn off the ignition
Turn on the ignition
After then done!
More Launch X431 projects,refer to:Launch X431 Feedback
This instruction show you guide on how to solve Doosan excavator P0408 maximum EGR rate…
Here is the instruction show you guide on how to calibrate 2403 steering valve for…
This function requires all connectors to be disconnected from all electrohydraulic valves on the tractor.You…
This instruction show you guide on how to remove center joint and center frame for…
How to solve Doosan heavy duty machine P0100 fault code signal error of air mass…
If the vehicle is oscillating on the wayline or catches up the wayline very slowly…