This instruction show you the on how to use Zed-Full programmer to add new key for Renault SYMBOL 2013+.And for more key programming for Renault,please check here:Renault Key Programming
Procedures:
Find OBD II Port in your car,connect Zed-Full to the OBD port.
Enter menu to select “OBD Application”
Select brand “Renault”
Select Model>SYMBOL 13+
Enter total Key quantity you want to have at the end of the procedure.Here we have 1 key and we will add 1more, total “2” key.
If exists, first turn ignition ON with working key and press on “Continue”
To move the car into key programming mode, dashboard will be reset, press “Yes” to confirm this step
Turn ignition OFF and press “Continue”, this section may take up to 2 minutes
Turn ignition ON and press “Continue”
Turn ignition ON with new key to be programmed and press “Continue”, this section may take up to 1 minutes
Completed.
Press “Continue” and return back to Main Menu
More information about Zed-Full programmer,please check here:
http://www.car-auto-repair.com/zed-full-immobilizer-key-programmer-all-in-one-solution/
Here is the instruction show you guide on how to repair P0731 incorrect 2nd gear ration…
Here is the how to use guide on Caterpillar machine misfire detection test by CAT…
On the Trucktool diagnostic software Settings view, you can edit single parameters, import and export…
Here is the instruction show you guide on how to solve Scania truck road transport…
Here is the instruction show you guide on how to solve engine speed sensor circuit…
This instruction show you guide on how to use CAT ET 2025A to perform override…