Rheingold ISTA Register New Battery for BMW F10

This is a mini guide on how to use Rheingold ISTA register battery for BMW F10.And I had written other article about BMW Battery Registration Before:

How To Use INPA Register BMW 7 Series New Battery

How to register a new BMW Battery after replacement

 

Rheingold ISTA Software Download:

2024.08 BMW Rheingold ISTA+ 4.48.40 4.23.14 ISTA-P 3.71 Free Download

 

Procedures of BMW F10 Battery Registration by Rheingold ISTA:

Connect your hardware to your BMW vehicle,then open the Rheingold ISTA.

At first,read your vehicle there you go click on activities.

Select service function,select number 03 body go all the way down to voltage supply to select “Battery”

Select “Register battery change”

Then click on ABL register battery replacement

It prompt “Searching for documents”

Then it will show the info to wait

Selection:

Select “Register battery replacement”

Then go next,it prompt below:

In the next test step,the battery exchange is entered!

Procedure the follow state:

Engine off

Terminal 15 on

Important!Entry cannot be canceled!

Original battery type and battery capacity acc. to vehicle order 90Ah…

Click “Enter battery,replacement same capacity”

Then it will ask “Is the newly installed battery an original BMW component”

Here I click “NO”

Please wait…

The battery replacement was successfully registered.

BMW F10 Battery Registration Video Guide:

auto

Recent Posts

Doosan Excavator P0408 Maximum EGR Rate Governor Deviation Error Solution

This instruction show you guide on how to solve Doosan excavator P0408 maximum EGR rate…

2 days ago

How to Calibrate 2403 Steering Valve for Fendt 800 S4 Tractor

Here is the instruction show you guide on how to calibrate 2403 steering valve for…

4 days ago

Massey Ferguson Tractor Electrohydraulic Spool Valves Configuration

This function requires all connectors to be disconnected from all electrohydraulic valves on the tractor.You…

7 days ago

How to Remove Center Joint and Center Frame for HITACHI Hitachi EX5600-7B

This instruction show you guide on how to remove center joint and center frame for…

1 week ago

How to Repair Doosan Machine P0100 DTC Signal Error

How to solve Doosan heavy duty machine P0100 fault code signal error of air mass…

2 weeks ago

How to Solve Fendt 800 Vario S4 wayline Running Slow

If the vehicle is oscillating on the wayline or catches up the wayline very slowly…

3 weeks ago