This instruction show you the procedures of how to use AVDI programmer to perform all key lost programming for Smart 453.The steps same as Renautl Twingo,so here use Renault online software to do it. And for more AVDI key programming,check here:AVDI Programmer Test Projects
Procedures:
Connect your AVDI programmer to your car OBD port
Start the Renault online software and select “Twingo”–>”Twingo III”(Same as Smart 453)
Select “Key Learning”–>”Learn Key”
Press and hold START button to begin
Then please turn ignition ON and press NEXT button when read.
Note:If you intend to learn a new card/key use it now!
Select “Reading PIN”,it will ask you “Do you have a working key”
Just click “NO”
Turn Ignition ON with mechanical key and click OK
During the PIN reading all keys/cards will be deleted!
You must finish the procedure by adding at least one key/card
When PIN reading complete,it will ask you to switch IGNITION OFF and click OK to continue
PIN show as below
Select number of keys to learn
You must prepare the new key with ProTag
Click OK to continue
Insert key/card 1 and turn ignition ON,then press NEXT button to continue
Key learning complete
Done!
This instruction show you guide on how to solve Doosan excavator P0408 maximum EGR rate…
Here is the instruction show you guide on how to calibrate 2403 steering valve for…
This function requires all connectors to be disconnected from all electrohydraulic valves on the tractor.You…
This instruction show you guide on how to remove center joint and center frame for…
How to solve Doosan heavy duty machine P0100 fault code signal error of air mass…
If the vehicle is oscillating on the wayline or catches up the wayline very slowly…