Here car-auto-repair.com share the procedures on how to use AVDI programmer to perform all key lost programming for Subaru BRZ.And for more Subaru keys projects,please check here:Subaru Key Programming.And for more AVDI key programming,check here:AVDI Programmer Test Projects
Subaru BRZ making a spare key and all key lost programming with a smart system reset
Connect AVDI programmer to Subaru BRZ obd port,then run software
Select “Subaru”
Click “Scan” to do general diagnosis
Then enter the immobilizer menu on the left side of the screen
Add New Spare Key:
Follow by key registration if you are adding a spare key
Check the following conditions
Then press Next
–The Power/Engine Switch is ON(IG)
–Turn off any cell phone near the driver’s seat
Touch the IG SW with a registered key.
Make sure the emblem side is facing the IG SW.(Ignition must be set to ON)
Touch the new spare key with the logo facing the IGN switch
Finishing registration,please wait
The key is successfully registered.
Subaru BRZ All Key Lost Programming
If all keys are lost,do a smart system reset
Wait for processing…
After smart system resetting,now a new master key can now be programmed using key registration
Check the following conditions,then press Next.
The Power/Engine Switch is ON(IG)
Turn off any cell phone near the driver’s seat.
Touch the IG SW with a key you want to program
Set the key on the passenger seat.
Finishing registration,please wait
Key code registration is complete
This instruction show you guide on how to solve Doosan excavator P0408 maximum EGR rate…
Here is the instruction show you guide on how to calibrate 2403 steering valve for…
This function requires all connectors to be disconnected from all electrohydraulic valves on the tractor.You…
This instruction show you guide on how to remove center joint and center frame for…
How to solve Doosan heavy duty machine P0100 fault code signal error of air mass…
If the vehicle is oscillating on the wayline or catches up the wayline very slowly…