This instruction show you guide on how to use iProg to do odometer correction for Suzuki SX4/Vitara 70F3425+93C86.
Preparations:
Newest iProg Pro Plus iProg+ v87 v84 v82 Free Download
Procedures:
You need have scrips for Suzuki SX4 and Vitara
Connect iProg programmer to Suzuki SX4 or Vitara OBD port,then run software on laptop
Select correct scripts in left side menu list
Input new value and click “Write KM”
Wait processing
Since the panels does not ahve access to and promo command here,the script made it so that it firstly overpays the panel patched with firmware,then they write the original flash back.
If there is no flash no the computer erspectively,the scripts downloads flash from the server,there are also no scripts.
The flash recovery function will help you to restart the backup
Success!Please check programmed mileage
More topics for iProg,please refer to:iProg test feedback
Here is the instruction show you guide on how to calibrate 2403 steering valve for…
This function requires all connectors to be disconnected from all electrohydraulic valves on the tractor.You…
This instruction show you guide on how to remove center joint and center frame for…
How to solve Doosan heavy duty machine P0100 fault code signal error of air mass…
If the vehicle is oscillating on the wayline or catches up the wayline very slowly…
This is instruction show you guide on how to adjust cruise control release linkage for…