This show a guide on how to use Toyota TIS Techstream to program a new key for Toyota Camry.And you also can program Toyota Camry manually,check this article:Program New Key for Toyota Camry & Solara Manually.But here i recommend you to use this Techstream to do it,it is very convenient,and Toyota TIS Techstream also a diagnostic cable of your Camry.
Preparations:
Toyota TIS Techstream Software Free Download
How to Install Toyota TIS Techstream Software
Procedures:
Connect your Techstream cable to vehicle obd port under the steering wheel.
Use your original master key to turn the ignition to “ON” position
Run Techstream software
After vehicle identification,select “Immobiliser”
Click “Utility” button at left side menu,then select “Key Registration”
Then press “Next” to proceed
Now Techstream will show you the steps to program new keys:
Step 1:
Remove the key from the Key Cylinder
Insert the key back into the Key Cylinder
Turn IG ON
After then click “Next” to continue
Step 2:
Remove the master key from the key cylinder within 20 seconds,then press Next.
Step 3:
Insert the key you want to program within 10 seconds,then press next.
<CAUTION>:DO NOT TURN THE IGNITION SWITCH ON
Now it need take a few minutes to complete the progress,please wait…
After the process completing,it will show the key registration is complete.
This key should now start the vehicle.
Press “Next” to register another key or press Exit to exit the key registration wizard
Now you can the new key on your Camry by using security light for immobilizer system.If keys can not work the security light will be blinking constantly,and if inserted key is registered key,the security light will disappear.And the you can take the key to your local locksmith store to cut the key.
Program Remote Buttons:
Back to “Main Body”
Select “Utility” button,then select “Wireless Code Registration”
Then it will ask you to perform below operations:
1.Ignition is ON
2.Driver side door is opened and other doors are closed
3.Driver side door is unlocked
After the click “Next” to continue
Note:The registration process will fail if the time limit is exceeded for any step
Remaining number of remotes that can be registered,here in the example number of remotes currently registered is 2,click “Next”
On the next screen,you will have to perform the following operations within 30 seconds.
On the remote transmitter,push:
1.Lock and Unlock simultaneously for 1 second.
2.Within 3 seconds,press either the LOCK or UNLOCK button again for 1 second
On the remote transmitter,push:
1.Lock and Unlock simultaneously for 1 second.
2.Within 3 seconds,press either the LOCK or UNLOCK button again for 1 second
Wireless Code Registration is complete
Press Next to register another key code,or press Exit to exit this function
Now test the remote function on your Toyota Camry.