Categories: How To

Toyota Camry 2007-2011 Stereo Phone Bluetooth Connection Guide

It wasn’t very many years ago that bluetooth techology sound like something out of a futuristic movie,but nowadays we’d be shocked not to have a handheld device wirelessly sync to our car’s infotainment system.Bluetooth not only helps us become safer drivers by allowing us to speak hands-free on the road but also give us freedom to stream our music wirelessly to our Camry stereo.This guide will show you how to pair your Android or IOS device to your Camry via bluetooth.And this example mainly focus the Camry without the navigation system display.

 

Connect Your IOS iPhone Device:

Tap on the “Settings” icon on your iPhone,and make sure your iPhone bluetooth function is actived

Turn on your Camry’s stereo, and tap the “AUX” button on the stereo twice. This will bring up the pairing menu.

Once the menu pops up, tap the button below the “SETUP” message on the display.

You will hear an audio prompt instructing you to choose from multiple options. Select “PAIR.”

At this point you will be asked to name the new phone being connected; for example, “Jerry’s Phone.”

Then the system will ask you to confirm. Say “yes.”

The Bluetooth system will now deliver a passkey on the stereo display, which is a set of number that you will have to confirm on your iPhone.

Tap on the Bluetooth menu on your iPhone, and look for the “TOYOTA” hands-free system to pop up. The system might take a few seconds to detect your iPhone.

 

Then tap the name on your iPhone, and enter the passkey as shown on the stereo display.

After all of these steps are taken, you should receive an audio confirmation that your iPhone is paired. This completes the setup process.

 

Connecting your Android Device

The process of setting up the Bluetooth function on your Camry’s stereo is the same as above. The process of connecting your Android device requires different steps to be taken.

Start by tapping the “AUX” button, and make sure the Bluetooth function on your Android device is on.

 

Then proceed to follow the same steps as with an iPhone device until you receive a passkey.

Tap the Bluetooth setting on your Android device.

And then tap “Scan for new devices” at the bottom of the screen.

Once your Android device scans and finds the “TOYOTA” hands-free, enter the passkey as shown on the stereo display.

After all of these steps are taken, you will receive an audio confirmation that your Android device is paired. This completes the setup process.

auto

Recent Posts

Hitachi EX5600-7B Folding Stairway and Surrounding Parts Removal Guide

This instruction show you guide on how to remove folding stairway and surrounding part for…

21 hours ago

Jungheinrich Junior AME13 Spring-Loaded Brake Electrical Connection Removal Guide

It is necessary step to remove electrical connection cable before you do disassemble or some…

3 days ago

How to Use Nexiq eTechnician Function Test?

Nexiq eTechnician provides a number of special tests to assist you with your vehicle diagnostic…

5 days ago

JCB JS140 Excavator P0523-68 Engine Oil Pressure Low Solution

Here car-auto-repair.com show you guide on how to repair JCB JS140 excavator P0523-68 trouble code…

6 days ago

Volvo Version 3 and 4 Truck Oil Pressure Test by Volvo Techtool

Here is the instruction show you guide on how to use Volvo TECHTOOL and VOCOM adapter to…

1 week ago

How to Solve Allison 3000 & 4000 Gen5 P071A Neutral at Stop Input Failed ON

This instruction show you guide on how to solve Allison 3000 & 4000 Gen5 transmission…

1 week ago