This article I share the guide on how to disable/remove seatbelt chimes warning for Toyota Tundra 2016 by Toyota Techstream TIS software.
Preparations:
Toyota TIS Techstream Video+PDF Tutorial
Toyota TIS Techstream Installation Guide
Latest Toyota TIS Techstream Software Free Download
Procedures:
Connect interface cable to vehicle OBD port and laptop,then run Techstream software and click to build connection.
It will show you the vehicle information as below,then click “Next” to continue
Then you will access system menu,select “Customize Setting”
Here you select customize function “Warning”
After seconds waiting,you will see below window
Set “Driver Side Seatbelt Warning Buzzer” and “Front Passenger Side Seatbelt Warning Buzzer” from “ON” to “OFF” value,then click right arrow icon to continue
Press Next to make the selected customize changes.
Done!
This instruction show you guide on how to solve Doosan excavator P0408 maximum EGR rate…
Here is the instruction show you guide on how to calibrate 2403 steering valve for…
This function requires all connectors to be disconnected from all electrohydraulic valves on the tractor.You…
This instruction show you guide on how to remove center joint and center frame for…
How to solve Doosan heavy duty machine P0100 fault code signal error of air mass…
If the vehicle is oscillating on the wayline or catches up the wayline very slowly…