VAG EEPROM Programmer 1.19g Free Download

VAG EEPROM Programmer 1.19g Functions:

Mileage correction
Reading the login from the immobilizer
Reset errors of SRS (Airbag)
Read and clear error codes

 

VAG EEPROM Programmer 1.19g Support Languages:

Dansk,Deutsch,English,Romana

 

How to Use VAG EEPROM Programmer 1.19g:

  1. Open .bin file. Write EEprom (Encrypted). Hopefully this clears the error and you can continue.
  2. Set Newmode. In this mode, you can read SKC if you Read EEprom (Decrypted).
  3. Convert current mileage into kilometers. Enter in lower right box.
  4. Set Kilometer.
  5. Set Back to Adapted Again.
  6. Go through VCDS to adapt. SKC for new cluster is 01412.

 

VAG EEPROM Programmer v1.19 Compatible Interface:

VAG KKL Cable (Blue),USB to Serial is good too

 

VAG EEPROM Programmer 1.19g Free Download (free download link have been removed by owner)

 

Here is a tested 100% work version:VAG EEPROM Programmer V1.19g Tested 100% Work Version

 

VAG EEPROM Programmer v1.19 Customer Feedbacks:
Feedback 1:
Vag Eeprom programmer can Read K-Line no Can Cluster

Feedback 2:
Original VCDS interface not work with third party software.
Buy a cheap kkl interface from anywhere, will work.

Feedback 3:
kkl cabel and VAG EEPROM Programmer about OBD
…and my Audi A4 B5 Bj:1999 with 8D0919861F Odometer works perfectly.

Feedback 4:
VAG EEPROM Programmer 1.19G work with simple k-line adapter, with VDO cluster like passat b5, audi a6, vw golf 4 and other without CAN.

Feedback 5:
just tried on 2003 passat with can instrument 3B0 920 827
with cable :VCDS K+CAN V.12.12 german version -cable set to dumb mode
=>works like a charm

Feedback 6:
1U1919034J A4-KOMBIINSTR. VDO V22 skoda octavia 2000 – k-line works.

 

More immo off software,please check here:IMMO Software download

auto

Recent Posts

How to Calibrate 2403 Steering Valve for Fendt 800 S4 Tractor

Here is the instruction show you guide on how to calibrate 2403 steering valve for…

20 hours ago

Massey Ferguson Tractor Electrohydraulic Spool Valves Configuration

This function requires all connectors to be disconnected from all electrohydraulic valves on the tractor.You…

4 days ago

How to Remove Center Joint and Center Frame for HITACHI Hitachi EX5600-7B

This instruction show you guide on how to remove center joint and center frame for…

7 days ago

How to Repair Doosan Machine P0100 DTC Signal Error

How to solve Doosan heavy duty machine P0100 fault code signal error of air mass…

2 weeks ago

How to Solve Fendt 800 Vario S4 wayline Running Slow

If the vehicle is oscillating on the wayline or catches up the wayline very slowly…

2 weeks ago

How to Adjust Cruise Control Release Linkage for Kubota L3901 Excavator?

This is instruction show you guide on how to adjust cruise control release linkage for…

3 weeks ago