This instruction show you guide on how to use VCDS to do EGR delete adaptation for VAG VW.
Preparations:
How to Configure VCDS & Diagnostic Cable for Your Laptop
VCDS 17.8.1 Full+Loader V2/V4 Free Download
Procedures:
Click “Select” in “Select Control Module”
Select “01-Engine”
Select “Login-11”
Here input “12233” to enable adaptation for EGR system
Now back to previous menu to select “Adaptation-10”
Select “Exhaust Gas Recirculation (EGR)”
Now here input new value “33768”
Now log out and do “Login-11” again
Then select “Adaptation-10”
Click “Test”,then click “Save”
Done!
This instruction show you guide on how to solve Doosan excavator P0408 maximum EGR rate…
Here is the instruction show you guide on how to calibrate 2403 steering valve for…
This function requires all connectors to be disconnected from all electrohydraulic valves on the tractor.You…
This instruction show you guide on how to remove center joint and center frame for…
How to solve Doosan heavy duty machine P0100 fault code signal error of air mass…
If the vehicle is oscillating on the wayline or catches up the wayline very slowly…