You can use the ECU Flasher (in VCP) to update the original ECUs. ECU Flasher can be accessed by opening the particular ECU and press the UP/Download button. Once you finish selecting the necessary Flash files you can start the Flash/Update procedure.
Preparations:
How to Install VCP System Diagnostic Tool Software
VCP System Professional Diagnostic Tool Software Download
Supported ECU File Types
.sgo
.frf
.bin (Additional flashing option is necessary to update certain Engine Control Units)
Procedure
Open the relevant ECU via the Main screen.
Press the Flasher (1) button in the Details page.
Open the appropriate Flash file via (1) and perform the update by pressing (2). In the Status display area (3) you view the Update progress.
Multiflasher
You can perform software updates for multiple ECUs simultaneously using the Multiflasher feature.
Procedure
Start the Multiflasher by pressing – Multiflash (1) in the Main screen.
Select the ECUs (1) and the appropriate Flash files (2), perform a test (3) and Start the flash operation.
This instruction show you guide on how to remove second tank for CLAAS AXION 960-920…
This instruction show you guide on how to solve Doosan excavator P0408 maximum EGR rate…
Here is the instruction show you guide on how to calibrate 2403 steering valve for…
This function requires all connectors to be disconnected from all electrohydraulic valves on the tractor.You…
This instruction show you guide on how to remove center joint and center frame for…
How to solve Doosan heavy duty machine P0100 fault code signal error of air mass…