VCP System WABCO Programmer Active & Disable Start/Stop System for VW

This article car-auto-repair.com show VCP System WABCO Programmer features and how to use it to active or disable start/stop system for VW.

 

What is WABCO Programmer in VCP?

WABCO Programming Add-on is a configuration tool for Audi Adaptive Air Suspension (AAS). Adjustments in EEPROM enable extensive customization options. Among other things, you can set the chassis height directly as a numerical value (+ / -) without performing time-consuming complex settings. These settings are very flexible, allowing to adapt chassis settings to different driving speed, i.e. in which driving modes which chassis height is to be used (Sport, Normal, elevator).

 

WABCO – currently supported vehicles

Audi A6 C6 (WABCO Air Suspension controller)

Audi A6 allroad C6 (WABCO)

Audi Q7 7L (Continental)

Audi A8 D3 (Contintental)

 

Launching the WABCO Programming Add-on

You can access WABCO Programming add-on via Guided functions – Others – Audi Adaptive Suspension WABCO programming

 

Select the appropriate vehicle model

 

WABCO – Configuration options

Using the WABCO Programming add-on you can set different configurations for different gears / speed. In order to do so, press the STG reading button, set the desired values and then press STG overwrite. The vehicle shall drive according to the set values.

You can also save this configuration (via Save as) for future use with other vehicles. You can access and load a saved configuration via Open File.

 

You can find the PRCoding feature in Others.

See manufacturer documentation for details:

VAG Group:VCP System Pr-Code Feature Guide

 

 

Preparations:

How to Install VCP System Diagnostic Tool Software

VCP System Professional Diagnostic Tool Software Download

 

 

Procedure

You can find the Start/Stop deactivation feature in Motor.

Start/Stop deactivation – supported vehicles

Below you can find the list of vehicles which can use the Start/Stop deactivation feature via OCF

MQB Platform (VW Golf 7, Skoda Octivia III 5E, Audi A3 8V, Audi TT 8S, Seat Leon 5F, VW Touran II, VW Lamando, VW Passat B8, Skoda Superb III)

PQ35 Platform (Golf 6, Passat 3C) – Gateway 7N0

PQ26 Platform (VW Polo 6C, Skoda Fabia III, Seat Ibiza 6P)

MLB Platform (Audi A4 8K, Audi A5 8T, Audi Q5 8R, Audi A6 4G, Audi A7 4G, Audi A8 4H)

MLB Evo Platform (Audi A4 B9, Audi Q7 II) – in progress

5.5.2 Start/Stop deactivation – procedure

Respective program steps and requirements.

Activate or deactivate (choose one) the Start/Stop system.

The configuration depends on the vehicle model:

MQB Platform (Audi A3 8V, VW Golf 7, Seat Leon 5F, Skoda Octavia III 5E, VW Passat B8, Audi TT 8S, etc.) deactivated

PQ35 Platform (VW Golf 6, VW Passat 3C etc.) – Gateway 7n0 deactivated

PQ26 Platform (VW Polo 6C, Skoda Fabia III, Seat Ibiza 6P etc.) deactivated

MLB Platform (Audi A4 8K Facelift und Vor-Facelift, Audi A5 8T FL&VFL, Audi Q5 8R FL&VFL, Audi A6 4G FL&VFL, Audi A7 4G FL&VFL, Audi A8 4H FL&VFL, VW Touareg II 7P etc.) deactivate

MLB Platform (Audi A4 8K Facelift, Audi A5 8T FL, Audi Q5 8R FL, Audi A6 4G FL, Audi A7 4G FL, Audi A8 4H FL, VW Touareg II 7P etc.) Inversion mode (Activate Last Mode of the Start/Stop switch, to turn on the saving function of the last setting. This function will be active until the setting is manually changed. Invert the LED signalling -> LED active when Start/Stop is activated.)

 

Select car-model/engine type

Turn on ignition

Don’t start the engine

Opening communication with ECU

Reading identification..

Procedure ended successfully

Turn off ignition now

Press “End” to close assistant