Here is a step-by-step guide on how to use VF2 Flasher programmer to read and write ECU for Ford EMS2513.For more VF2 Flasher projects please refer to:VF2 Flasher Cases.
Procedures:
Power on VF2 Flasher programmer
Press “Protocol List”
Select “Search” and input “ems25”
Select “Ford Continenial EMS2513” and tab “Instructions”
Select “External connections”
Follow the instruction to build connection to Ford EMS2513 ECU
Back to menu to select “IDENTIFY”
Identification process..
After then select “Read All”
Reading in progress..
Checksum in progress
Select a location on SDCard to save the data file from Ford EMS2513 ECU
For write/programming process,you just select eprom or flash data file then press “Program int.xx” button to start.It is very easy to operate.
This function requires all connectors to be disconnected from all electrohydraulic valves on the tractor.You…
This instruction show you guide on how to remove center joint and center frame for…
How to solve Doosan heavy duty machine P0100 fault code signal error of air mass…
If the vehicle is oscillating on the wayline or catches up the wayline very slowly…
This is instruction show you guide on how to adjust cruise control release linkage for…
This instruction show you guide on how to use AGCO EDT diagnostic software to perform…