Categories: Auto Repair

Volkswagen Tiguan 00349 Fault Code 09G TCM Shift Locked Repair

A Volkswagen Tiguan get the 00349 diagnostic trouble code,and the transmission can not work correctly,it seem that the transmission can not shift normally.More Volkswagen repair,check this tag:Volkswagen Repair Projects.

 

Preparation:

Newest ODIS-E Engineering 17.0.1/12.2.0/9.0.1 Free Download

08.2023 VW ODIS 23.0.5 & 7.2.1 & 5.2.7 Diagnostic Software Free Download

 

Use VW ODIS software to diagnose the VW Tiguan,get the 00349 trouble code.

00349:Solenoid Valve 10 (N283): Open or Short to Ground

 

Possible Symptoms

Shifting issues

 

Possible Causes

1.Damaged wiring harness

2.Failed Solenoid Valve

3.Failed TCM

 

Possible Solutions

Ohm test wiring harness

 

Special Notes

When found on the 6 speed 09G transmission:

Solenoid Valve 10 (N283) is also noted as The Pressure Control Valve 6 (N271)

 

After check wiring harness and solenoid valve,both of them can work normally.So it seem the TCM get trouble.

 

Remove Transmission Control Module from Volkswagen Tiguan,and open the cover to check the PCB board.And after appearence check and circuit measuring,it seem that the 99327-00005 communication chip damaged.

Replace a new 99327-00005 communication chip,and install all back on VW Tiguan.

Start engine,and test transmission work correctly.

auto

Recent Posts

Doosan Excavator P0408 Maximum EGR Rate Governor Deviation Error Solution

This instruction show you guide on how to solve Doosan excavator P0408 maximum EGR rate…

2 days ago

How to Calibrate 2403 Steering Valve for Fendt 800 S4 Tractor

Here is the instruction show you guide on how to calibrate 2403 steering valve for…

4 days ago

Massey Ferguson Tractor Electrohydraulic Spool Valves Configuration

This function requires all connectors to be disconnected from all electrohydraulic valves on the tractor.You…

7 days ago

How to Remove Center Joint and Center Frame for HITACHI Hitachi EX5600-7B

This instruction show you guide on how to remove center joint and center frame for…

1 week ago

How to Repair Doosan Machine P0100 DTC Signal Error

How to solve Doosan heavy duty machine P0100 fault code signal error of air mass…

2 weeks ago

How to Solve Fendt 800 Vario S4 wayline Running Slow

If the vehicle is oscillating on the wayline or catches up the wayline very slowly…

3 weeks ago