This article show a guide on how to use Volvo PTT to calibrate electrical unit pump for Volvo MACK I II III.And for more Volvo PTT projects,check here:Volvo Premium Tech Tool Projects
Preparations:
2024 Volvo TechTool PTT 2.8.241 APCI 0.7.1.0/2.7.116 All Version Free Download
Volvo Diagnostic Kit (88890300)
Volvo VOCOM 88890300 Diagnostic Kit
Procedures:
Connect Volvo PTT interface to vehicle,and run Volvo PTT software.
Click “Manual Selection”
Login and identify connected vehicle
Select “Mack Trucks”–>”V-MAC I/II/III,ITC”–>”Model”–>”MACK”
Click “OK” to continue
Enter a work order number and click “Start Work”
Select “Calibrate” tag
Under “Engine,Engine mounting and equipment”
Select“2361-07-03-01-Unit Pump,Calibration”
Click “Start”
Please read the information at left filed:
“The Calibration code in the ECU can be verified by the user by entering an EUP then select the Test radio button and click on the Run button.The ECU will be queried for the Calibration codes i memory and those that match the entries made by the user will be identified by a green symbol A red symbol indicates the Calibration Code in memory does not match the Calibration Code entry made by the user.…”
Select radio button to test or calibrate the electrical unit pump
Click “Play/Run” button to start the operations
Done!
This instruction show you guide on how to solve Doosan excavator P0408 maximum EGR rate…
Here is the instruction show you guide on how to calibrate 2403 steering valve for…
This function requires all connectors to be disconnected from all electrohydraulic valves on the tractor.You…
This instruction show you guide on how to remove center joint and center frame for…
How to solve Doosan heavy duty machine P0100 fault code signal error of air mass…
If the vehicle is oscillating on the wayline or catches up the wayline very slowly…