This article show a guide on how to use Volvo PTT to change transmission performance mode.
Preparations:
2024 Volvo TechTool PTT 2.8.241 APCI 0.7.1.0/2.7.116 All Version Free Download
Volvo VOCOM 88890300 Diagnostic Kit
Preparations:
Login contre system,and a connection to vehicle
After vehicle identification,click “Program”
Select “17-22-03-03 Parameter,programming”,click “Start”
Click “I have read and understand the above advisory”,then click “Continue” to proceed
After Volvo PTT check conditions automatically,click “Continue” to proceed.
Filter the control unit to locate “Transmission ECU (TECU)”
Select detail information of “P1AP3 Transmission Performance Mode”
Transmission Performance Mode
Description:
0=Manual Performance mode available
1=Auto Performance mode available.The transmission will automatically return to Economy mode when the engine is no longer operating under high load.
2=Disable,Performance mode not available
In the value column,double click value to change the parameter value
The click “Continue” to confirm and start parameter programming
Volvo Diagnostic Kit (88890300)
Please Note:Click “Finish Work” before disconnecting from vehicle
Here is the instruction show you guide on how to calibrate 2403 steering valve for…
This function requires all connectors to be disconnected from all electrohydraulic valves on the tractor.You…
This instruction show you guide on how to remove center joint and center frame for…
How to solve Doosan heavy duty machine P0100 fault code signal error of air mass…
If the vehicle is oscillating on the wayline or catches up the wayline very slowly…
This is instruction show you guide on how to adjust cruise control release linkage for…