Here I will share the guide on How to mileage programming for VW Golf MK5.And if you want to learn pls follow below steps.Hope it is helpful to you!
Digiprog 3 newest version
VW Golf MK5 with 54010 miles
Step 1:Turn the ignition to ON and start the engine
Hook up the DigiProg Ⅲ main unit to the vehicle’s OBD diagnostic socket via cable
The indicator light on dashboard will flash. Check the parameter (km) on the dashboard.
Step 2:The default entry password of Digiprog 3 system is 1, manually enter the password.
Welcome the MAIN MENU. Access the system via CAR/Truck option.Select vehicle manufacturer as VW and then select vehicle model as GOLF
Step 3:Select GOLF5 and then choose TACHO DIAG option
Step 4:Check the real current odometer on the dashboard. Enter the new odometer miles manually.
Then the dashboard light will illuminate and the DIGIPROG3 km tool screen will prompt you to check the written value. Confirm the value and exit the program.
This instruction show you guide on how to perform hydrocarbon dosing control valve test for…
This instruction show you guide on how to solve Fendt tractor SPN 100 FMI 31…
Detroit GHG17 Heavy Duty Engine Piston Protrusion Measurement Procedure Related Contents: 2024.06 Detroit Diesel…
This instruction show you guide on how to remove and install water temperature regulator housing.…
Monza, Kadett and Ipanema Multec 700 GM ECU Components Pinout Vehicles: Monza, Kadett and…
This illustration show you guide on how to remove oil pressure regulation valve for CLAAS…