Categories: Auto Repair

VW POLO Audio Show “1000 Error” After Starter Motor Replacing

A customer called me for his VW POLO audio show the 1000 error massage.This mini guide show method to solved this problem.

 

The VW POLO audio 1000 error massage was caused by replacement of engine starter motor.And the technicians enter the wrong password more than once,then the audio system locked the audio thoroughly.And it can not unlock automatically by key operations.

 

How to solve VW POLO Audio Locked?

Remove the audio unit

Disassemble the PCB from the unit.

Remove the chip 24C04,and use the car key master to read out the password.

Install the disassembled part back,then enter the right password.

 

VW POLO password 0483 24C04.YHS

https://mega.nz/#!MF8EmKJS!pJPQ9PdEDAjtggIAOK7evL_LkLvD1Lplf7VfTtHP8uk

auto

Recent Posts

How to Calibrate 2403 Steering Valve for Fendt 800 S4 Tractor

Here is the instruction show you guide on how to calibrate 2403 steering valve for…

2 days ago

Massey Ferguson Tractor Electrohydraulic Spool Valves Configuration

This function requires all connectors to be disconnected from all electrohydraulic valves on the tractor.You…

5 days ago

How to Remove Center Joint and Center Frame for HITACHI Hitachi EX5600-7B

This instruction show you guide on how to remove center joint and center frame for…

1 week ago

How to Repair Doosan Machine P0100 DTC Signal Error

How to solve Doosan heavy duty machine P0100 fault code signal error of air mass…

2 weeks ago

How to Solve Fendt 800 Vario S4 wayline Running Slow

If the vehicle is oscillating on the wayline or catches up the wayline very slowly…

2 weeks ago

How to Adjust Cruise Control Release Linkage for Kubota L3901 Excavator?

This is instruction show you guide on how to adjust cruise control release linkage for…

3 weeks ago