Scania VCI3 has a number of lamps indicating status,just like its predecessor VCI2. New for VCI3 is
a blue lamp for information about the wireless communication (WLAN). it is important for you to understand each lamps mean during Scania VCI running.So here car-auto-repair.com show details of VCI 3 lamps meaning.
Related Contents:
2024.07 Scania SDP3 V2.61.2 V2.40 Diagnostic Software Free Download
2023 2018 Scania Multi EPC Parts Catalogue Free Download
How to Setup WIFI for Scania VCI-3 VCI3 V2.21
The following is a description of the different lamps in the VC13 unit.
CAN(yellow)
When the lamp is on, this indicates that there is activity on the CAN bus.
Info(orange)
The lamp flashes rapidly when general information is sent between the computer and VCI3.
Error (red)
The lamp is on when there is a communication error in VC13,for example in the firmware or hardware.
WLAN (blue)
The lamp is on or flashes when VCI3 is connected to a local network via wireless connection in one of the following ways:
The lamp flashes slowly and steadily when VC13 is connected to a computer via a wireless network with good signal strength. The lamp is constantly on when VCI3 does not have contact with the computer but is connected to a wireless network.
Power (green)
The lamp is constantly on when VCI3 is supplied with power.
This instruction show you guide on how to remove and install crankshaft rear seal for…
This instruction show you guide on how to use JPRO diagnostic to do SCR performance…
Here is the instruction show you guide on how to remove and disassemble master cylinder…
This instruction show you guide on how to solve Deutz EMR engine 71 / 2791 /…
Here is the instruction show you guide on how to repair P0731 incorrect 2nd gear ration…
Here is the how to use guide on Caterpillar machine misfire detection test by CAT…