Categories: Auto Repair

Why Your Gas Pedal Feels Heavy or Cars Engine Lost Power?

In this instruction, we’ll show you why your car engine lost power if you have a cable control throttle body. Modern cars nowadays equipped with electronic throttle body which means there is no cable controlled like that. This article only for cable control throttle bodies.

More articles about throttle, please check here:

How To Clean Throttle Body By Yourself (Step By Step)

Ford F150 Throttle Response Adjustment (No Need Tools)

OPCOM VAXU-COM Reset Electronic Throttle Body

 

If the cable loose like that

It won’t be able to open the throttle plate fully open.

To fix it, you will need someone to assist you. When the gas pedal pressed all the way down, check the throttle by hand, take out this clip and pull the cable in good position then put clip back.

You can check the difference now. Your engine will gain power after doing that.

Some cars cable controlled like that,you just have to loosen the nuts, move them forward to get rid of the loosen cable.

Another problem with cable control throttle body is when the pedal gets heavy under your foot, because the cable exposed all the time, it pulls dirt inside over time.

We just need to clean it and lightly lubricate it. WD-40 is the best option in this case.

You can remove the cable and raise the cable then use WD-40. This will clean the entire cable, then wipe it and put it back.

 

Kevin

Recent Posts

Doosan Excavator P0408 Maximum EGR Rate Governor Deviation Error Solution

This instruction show you guide on how to solve Doosan excavator P0408 maximum EGR rate…

1 day ago

How to Calibrate 2403 Steering Valve for Fendt 800 S4 Tractor

Here is the instruction show you guide on how to calibrate 2403 steering valve for…

3 days ago

Massey Ferguson Tractor Electrohydraulic Spool Valves Configuration

This function requires all connectors to be disconnected from all electrohydraulic valves on the tractor.You…

6 days ago

How to Remove Center Joint and Center Frame for HITACHI Hitachi EX5600-7B

This instruction show you guide on how to remove center joint and center frame for…

1 week ago

How to Repair Doosan Machine P0100 DTC Signal Error

How to solve Doosan heavy duty machine P0100 fault code signal error of air mass…

2 weeks ago

How to Solve Fendt 800 Vario S4 wayline Running Slow

If the vehicle is oscillating on the wayline or catches up the wayline very slowly…

3 weeks ago