Categories: Auto Coding

WinKFP Expert Mode Programming Configuration

This post show how to configure WIN KFP Expert mode programming.

 

BMW Standard Tools 2.12 Free download (include WinKFP)

WinKFP error 211 Solutions

How to Set Up WinKFP on Win XP

BMW Coding/Flashing/Progrmming PDF+Video Guide

 

WinKFP Expert Mode Programming Configuration:

Delete all files in the Develop folder.

Select the program data folder in this case MV1746.

Select the MV1746.DAT file open with Notepad

Press Ctrl + H and search the program number. The program number here is 7592774.

You will then find a line of numbers.
1st Program Number
2nd Hardware Number
3rd 0pa Number
4th 0da Number

Copy the 2 files over to Develop folder. *.0pa and *.0da file

Copy the 2 files over to Develop folder. *.0pa and *.0da file

Select the Coapi.ini file

The ZBNUMBER and SWNUMBER must be changed to the program number.

The ZBNUMBER and SWNUMBER must be changed to the program number the save the file.

Select WinKfp and check the configuration.

Change configuration to be exactly the same as the example. Select OK when completed

Select Comfort Mode

Select Enter ZUSB

Select OK after entering program number.

Select OK

Select Enter Vin

Select OK after entering the VIN.

Select Done

The ECU address, PABD and P-SGBD will appear. Exit program and restart program.

Select Comfort Mode

Select Enter ZUSB

Select OK after entering program number.

Select OK

Select Done

Select Cancel. Do not enter a VIN number.

Select Expert Mode

Select PABD

Select number as found before.

Select P-SGBD

Select number as found before.

Select ECU Address

Select number as found before.

Select Program file

Select OK

You will see the program file number. Select Data file.

Select OK

Select OK this error can be ignored as you are in Expert Mode.

You will see the data file number. Select Done.

Select Prog Program

Now enter the VIN and press OK. Programming will start.

Now select Prog Data and programming will start.
After programming you can exit the program.

auto

Recent Posts

Doosan Excavator P0408 Maximum EGR Rate Governor Deviation Error Solution

This instruction show you guide on how to solve Doosan excavator P0408 maximum EGR rate…

1 day ago

How to Calibrate 2403 Steering Valve for Fendt 800 S4 Tractor

Here is the instruction show you guide on how to calibrate 2403 steering valve for…

4 days ago

Massey Ferguson Tractor Electrohydraulic Spool Valves Configuration

This function requires all connectors to be disconnected from all electrohydraulic valves on the tractor.You…

7 days ago

How to Remove Center Joint and Center Frame for HITACHI Hitachi EX5600-7B

This instruction show you guide on how to remove center joint and center frame for…

1 week ago

How to Repair Doosan Machine P0100 DTC Signal Error

How to solve Doosan heavy duty machine P0100 fault code signal error of air mass…

2 weeks ago

How to Solve Fendt 800 Vario S4 wayline Running Slow

If the vehicle is oscillating on the wayline or catches up the wayline very slowly…

3 weeks ago