Here is an instruction show you guide on how to perform firmware update for Xentry Diagnosis VCI.
Related Content:
2024.03 Benz Xentry.OpenShell.XDOS Diagnostic Software Free Download
How to Install Benz Xentry 2023.06 Diagnostic Software
Steps:
Firmware update of the XENTRY Diagnosis VCI may be required after updating the diagnosis computer.
This is displayed to you via a pop-up message. Firmware status information is also displayed in the VCI Manager:
Click the “Update” menu item in the VCI Manager. Click on the “Start update” button.
When executing the update, please ensure that the USB connection between diagnosis computer and VCI is not interrupted:
Confirm by clicking on “OK”. The firmware update of the XENTRY Diagnosis VCI will start now.
You will receive a message after executing the firmware update:
Click on “OK”. Coupling between the diagnosis computer and VCI is confirmed in the next window.
You can continue to work with XENTRY Diagnostics Open Shell as usual.
If the vehicle is oscillating on the wayline or catches up the wayline very slowly…
This is instruction show you guide on how to adjust cruise control release linkage for…
This instruction show you guide on how to use AGCO EDT diagnostic software to perform…
This instruction show you guide on how to remove folding stairway and surrounding part for…
It is necessary step to remove electrical connection cable before you do disassemble or some…
Nexiq eTechnician provides a number of special tests to assist you with your vehicle diagnostic…