It is a simple post on how to disassembly and reassembly swivel joint for Yanmar ViO45-4 and ViO55-5 excavators.
Related Contents:
Yanmar Diagnostic Tool Adapter Kit
2023 Yanmar Smart Assist SA-Direct 2.37 2.20 Free Download
2017 Yanmar Heavy Equipment EPC+Workshop Service Manual Download
2009.11 YANMAR Heavy Equipment EPC Software Free Download
Yanmar ViO45-5 ViO55-5 Swivel Joint Disassembly and Reassembly
Disassembly
(1) Remove the bolts 14.
(2) Remove the swivel flange 5 and the O-ring 11.
(3) Remove the external snap ring C 12 and the swivel spacer 5 from the swivel shaft 2.
(4) Pull the swivel shaft 2 out of the swivel hub 4 and remove O-ring 10.
(5) Remove the swivel seals 8, O-ring 7 and back-up ring 9 from the swivel hub 4.
Reassembly
(1) Install swivel seals 8, O-ring 7 and back-up ring 9 into swivel hub 4.
(2) Apply multi-purpose grease to the inner surface of swivel hub 4.
(3) Install the O-ring 10 on the swivel shaft 2 and insert the shaft into the swivel hub 4 slowly.
• Use a jig E-004
• Apply multi-purpose grease to the outer surface of the shaft.
(4) Install the swivel spacer 5 and the external snap ring 12 to the swivel shaft 2.
(5) Install the swivel flange 3 with O-ring 11, on the swivel hub 4 in this order and tighten bolts 14.
More Yanmar machine repair case,please refer to Yanmar Trouble Repair
Here is the instruction show you guide on how to calibrate 2403 steering valve for…
This function requires all connectors to be disconnected from all electrohydraulic valves on the tractor.You…
This instruction show you guide on how to remove center joint and center frame for…
How to solve Doosan heavy duty machine P0100 fault code signal error of air mass…
If the vehicle is oscillating on the wayline or catches up the wayline very slowly…
This is instruction show you guide on how to adjust cruise control release linkage for…