This article show you guide on how to use Zed-Full to perform all key lost for Ford Focus 2015+ by OBD.
Procedures:
Connect Zed-Full immobilizer solution to Ford Focus OBD port
Then enter menu to select “OBD Application”
Select “Ford USA”,but also can be programmed under “Ford EU” menu
Select “Model list”–>”Focus”–>”Prox 15+ (Beta)”
Here we perform all key lost programming,so we need to delete all keys
Press “Start-Stop” button on car and press “Continue” button on Zed-Full screen
After connection build,it will show you vehicle immo information,include VIN,key number…
Now all keys are deleted
And now you must program at least 2 keys,press “Yes” to add new keys
Insert the key to be programmed to the slot under armset and press “Continue” button
Then it will prompt you
Key is programmed,press the lock button of the remote.
To program next key ,please press “Yes” button
And you need to insert the key to be programmed to the slot under armset and press “Continue”
Button
Just repeat above operation
After programming completing,please test both keys on Ford Focus.
This instruction show you guide on how to solve Doosan excavator P0408 maximum EGR rate…
Here is the instruction show you guide on how to calibrate 2403 steering valve for…
This function requires all connectors to be disconnected from all electrohydraulic valves on the tractor.You…
This instruction show you guide on how to remove center joint and center frame for…
How to solve Doosan heavy duty machine P0100 fault code signal error of air mass…
If the vehicle is oscillating on the wayline or catches up the wayline very slowly…