This article show you the guide on how to perform Ford Fusion 2017+ Keyless HITAG Pro all key lost programming by Zed-Full.
Procedures:
Connect Zed-Full immobilizer solution to obd port
Then enter menu to select “OBD Application”
Select “Ford USA”–>”Model List”–>”Fusion”
Select year of the car “Prox 17”
All key are lost in this instruction,so we enter to “Erase and program”.
If you do not want to erase keys,you may also “Add key”
At least 2 keys must be programmed to start the car
Turn ignition ON,then press “Continue”
Connection is successful!
Car VIN number and part number of BCM appears on Zed-Full screen,
All key are deleted.
Turn ignition off the press “Continue” button on Zed-Full screen
Press “Continue” to add a new key
Remove the sillicon cover from the button of cup holder and insert key to be programmed to the key hold in the cup holder and press “Continue”
Press lock button once
Key is programmed,press “Continue”
To program next key press “Continue” button
Repeat the before procedures.
After programming complete,please test both key on car.
This illustration show you guide on how to repair Cummings QSK60 CM2358 engine camshaft speed/position…
Here is the instruction show yo guide on how to solve Fendt MT800E tractor DEF…
Here car-auto-repair.com show you guide on how to solve ISUZU construction 4JJ1 engine P0092 fuel…
Here is the illustration show you guide on how to solve Perkins 1106D electric power…
Here comes the instruction on how to use SerDia2010 to perform assembly inspection and initialization…
This instruction show you guide on how to perform No load max differential pressure measurement…