This instruction show you guide on how to remove clutch actuator for DAF XF-CF Euro 6 truck equipped with ZF-AS 6AS1000 Tronic lite transmission.
Related Contents:
DAF Davie XDc II Runtime 5.6.1 Software Free Download
2022 Paccar ESA Electronic Service Analyst 5.5 5.4 5.2 Free Download
ZF Testman Pro 10.5 Transmission Diagnostic Software Free Download
Procedures:
1 Unclip cable clips (1).
2 Unclip and remove cable clips (2)
(on both sides if necessary).
3 Open locking wire 68.064.
4 Take off the release fork 68.010.
5 Remove locking wire 68.064 and cable clip (1).
6 Remove screws 68.130, 68.140, and 68.160.
7 Remove cover 68.120.
8 Remove screws 68.060, 68.070.
9 Remove screws 68.080, 68.090.
10 Remove angle piece 68.050.
11 Remove screws 68.030, 68.040 and hold onto the clutch actuator while doing this.
12 Remove the clutch actuator 68.010.
This instruction show you guide on how to solve Doosan excavator P0408 maximum EGR rate…
Here is the instruction show you guide on how to calibrate 2403 steering valve for…
This function requires all connectors to be disconnected from all electrohydraulic valves on the tractor.You…
This instruction show you guide on how to remove center joint and center frame for…
How to solve Doosan heavy duty machine P0100 fault code signal error of air mass…
If the vehicle is oscillating on the wayline or catches up the wayline very slowly…